High Pressure Hose
Page 1, 2
Hydro Flex SAE 100 R 14 Teflon Hose
| Specifications: | (P.T.F.E.) Inner Teflon Tube Reinforcement by single layer of stainless steel wire |
![]() |
| Application: |
Diluted or Concentrated acids, caustics, hot lacquers, solvents, fuel, oils, oxidising agents, and gases. Generally unaffected by all chemicals (except melted alkaline metals) used in Laundry, Rubber, Plastics, Chemical & Refrigeration Industries. Maximum utilisation of steam pressure 250 PSI. Cover: Oil, Weather and abrasion resistant Synthetic black rubber. |
|
| Temperature | Teflon flexible hoses are capable to resisting low and high temperature between -70°C to +260°C for longer period and have an unlimited shelf life. | |
| Sizes | Hoses are available in the following sizes: I.D. 3/16" - 1.1/8" 4.8mm - 28.6mm O.D. 8.2" - 33.5" |
Hydro Flex 3 Wire Braided Hydraulic Hose With Rubber Cover
| Specifications | Hydro Flex | ![]() |
| Application: |
High Pressure Oil Lines, Fuel Oil, Gasoline, Air and Water. |
|
| Construction: | Tube: Black, Oil resistant Synthetic Rubber. Reinforcement: 3 ply Braided high tensile steel wire. Cover: Black Oil resistant Synthetic Rubber. |
|
| Temperature | -40°F to +200°F |
|
| Sizes | Hoses are available in the following sizes: I.D. 1/4" - 2" 6.4mm - 50.8mm O.D. 3/4" - 2.3/4" 19.0mm - 69.8mm |
Hydro Flex SAE R9 Super High Pressure Spiral Hose
| Specifications: | Tube: Synthetic Rubber. Four spiral plies of High Tensile Steel wire wrapped in alternating directions and Synthetic Rubber cover, resistant to Oil, weather and abrasion. |
![]() |
| Application: |
High pressure hydraulic service petroleum base hydraulic fluids, water, diesel, fuel and lubricating oils. |
|
| Temperature | -40°C to 120°C and tested to mm impulse cycles 2,00,000 for sizes 3/8 and 1/2 inches and 3,00,000 cycles for all other sizes without leakage or other malfunction. -40°F to +248°F |
|
| Sizes | Hoses are available in the following sizes: I.D. 3/8" - 2" 9.5mm - 50.8mm O.D. 21.4mm - 71.45mm |
Hydro Flex SAE R10 Super High Pressure Spiral Hose
| Specifications: | Tube: Synthetic Rubber. Four spiral plies of High Tensile Steel wire wrapped in alternating directions and Synthetic Rubber cover, resistant to Oil, weather and abrasion. |
![]() |
| Application: |
Extra high pressure hydraulic, service petroleum base hydraulic fluids, water, diesel, fuel and lubricating oils. |
|
| Temperature | -40°C to 120°C and tested to mm impulse cycles 4,00,000 without leakage or other malfunction. -40°F to +248°F |
|
| Sizes | Hoses are available in the following sizes: I.D. 3/16" - 2" 4.8mm - 50.8mm O.D. 19.05mm - 70.65mm |
Page 1, 2
We also manufacture products as per Customer requirements.
Vikas Hydro Inc.



