TECHNICAL SPECIFICATION
| L1 |
Overall Length |
1422mm |
| L2 |
Rear Power Unit to face of fork |
795mm |
| L3 |
Length of Fork |
750mm |
| B1 |
Wheel Base |
1162mm |
| C1 |
Turning Radius |
1355mm |
| UC |
Under Clearance - Leg |
40mm |
| H5 |
Height of Leg |
85mm |
| H3 |
Height of Mast (Lowered) |
1860mm |
| H2 |
Height of Lift |
2650mm |
| H1 |
Overall Height (Raised) |
3150mm |
| H4 |
Free Lift |
280mm |
| W2 |
Width of Power Unit |
825mm |
| W1 |
Width Over Leg |
530mm |
| W3 |
Max. Fork Spread |
750mm |
| W4 |
Width Between Legs |
220mm |
| W5 |
Width of Fork |
76mm |
| G1 |
Rear Overhang |
178mm |
| Load Wheel (Steel) Dia |
83mm |
| Drive Wheel (Cushion Rubber) Dia. |
254mm |
| Laden |
Unladen |
| Travel Speed |
3.6km/hr. |
4.8km/hr. |
| Lifting Speed |
10.8mtr./min. |
18mtr./min. |
| Lowering Speed |
18mtr/min. |
10.8mtr/min |
CAPACITY
Capacity : 1000Kg. (Uniformly distributed)
Body
Steel Fabrication
BATTERY
24V Traction Battery, 219AH at 5 Hour rate of discharge
LIFTING/LOWERING
The motor is energised by a micro-switch,through a contactor, actuated by the control valve lever, thus ensuring running of the motor only while lifting. Lowering isdone by the same lever, pushed in the opposite side and the forks come down of their own weight
TRAVELLING
Driven by 1 HP 24V motor through a double reduction chain drive. Two stage traction speeds, controlled by the micri-switches opreted by finger controlled forward/ reverse push button, locted at the steering handle.
STEERING
The complete drive unit is mounted on a trunnion and is supported by heavy duty ball & roller bearings. This entire unit is rotated by a control handle for steering the truckk.
BRAKES
The control handel, through a can and link arran ement, actuate a pair of brakes shoes, which operates on a brake drum, directly mounted on the traction motor shaft. The brakes are on when the control handle is either in verticle or horizontal position. the control handle is spring loaded and remains in the verticle position when release.
ELECTRIC CONTROL
Two stage traction speeds by finger controlled push buttons which operate 24V heavy duty contactors. Control Lever operates the Hydraulic Motor through micro-switch.
ELECTRONICS
May be supplied as Optional Control for Traction at additional price.
|
Vikas Hydro Inc.
» Hydraulic Hoses